Tuesday, February 28, 2012

Forrest WW10307100 Woodworker II 10-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade price


you're want to buy Forrest WW10307100 Woodworker II 10-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade,yes ..! you comes at the right place. you can get special discount for Forrest WW10307100 Woodworker II 10-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade.You can choose to buy a product and Forrest WW10307100 Woodworker II 10-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade at the Best Price Online with Secure Transaction Here...





other Customer Rating:

List Price: $107.00
Price:
See price in cart(Why don't we show the price?)
  This item ships for FREE with Super Saver Shipping. Details


read more Details

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and re-straightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind its blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2-inches thick. They have a 30 degree Alternate Top Bevel with a 5 degree Face Hook on 10-inch diameters and smaller.

With this all purpose blade for tables saws you can rip and crosscut 1" - 2" rockhards and softwoods resulting in a smooth-as-sanded surface. With 20 DEG face hook, ply-veneers will crosscut with no bottom splinter at moderate feed rates. Double hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut). Ends second-step finishing. Ends cutting 1/16" oversize to allow for resurfacing. Buy and sharpen one blade instead of 3, (24T rip, 50T combination, 80T crosscut).



Forrest Saw Blades dampener helps kill saw scream-whistle from a vibrating blade surface.
Dampen out motor and belt vibrations from being transmitted up to the rim of the teeth.
Greatly reduce cutting noise.
Hold blade rigid and true for better cuts on your machine.
Are hardened and precision ground flat within .001" to keep your blade true.



Freud D1040A Diablo 10-Inch 40-Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating, review


you're want to buy For highly versatile blades that makes clean cuts in a broad variety of wood types, look no further than the Freud D1040A Diablo 10-Inch General Purpose Saw Blades. These are your go-to blades for slicing through oak, pine, plywood, pressure-treated lumber, and beams. Ideal for a wide variety of applications, these blades reduce the need to change blades between tasks. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.


Model # D1040A
Diameter 10"
Machine Use Miter Saw, Table Saw
Application General Purpose
Teeth 40 ATB
(Alternate-Top Bevel)
Arbor 5/8"
Kerf .098"
Hook Angle 15°
Makes Clean Cuts in a Wide Variety of Wood
Achieving premium results when performing any kind of woodworking is all about clean, accurate cuts. The Freud D1040A blades make this process easy, fast, and precise. An added time-saving feature, the blades' general-purpose versatility will let you employ them job after job. These blades are even suited to making rip cuts, often achieving a smoother finish than dedicated ripping blades.

Contractors, construction workers, and avid do-it-yourselfers will want to keep these blades on hand for varying jobs that call for making rips and crosscuts in both hardwoods and softwoods. Appropriate application materials include oak, pine, plywood, pressure-treated lumber, and beams.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1040A blades' clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between each of the blades' 40 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over each blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blades' laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping of the blades, helping extend their cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on them over the long term, the Freud D1040A blades are designed for durability. The blades' hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting each blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1040A blades are a great addition to your workshop because they are designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D1040A Diablo 10-Inch General Purpose Saw Blade.
10" x 40 Tooth, Carbide Tipped, Finishing Saw Blade, Thin Kerf.
,yes ..! you comes at the right place. you can get special discount for For highly versatile blades that makes clean cuts in a broad variety of wood types, look no further than the Freud D1040A Diablo 10-Inch General Purpose Saw Blades. These are your go-to blades for slicing through oak, pine, plywood, pressure-treated lumber, and beams. Ideal for a wide variety of applications, these blades reduce the need to change blades between tasks. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.


Model # D1040A
Diameter 10"
Machine Use Miter Saw, Table Saw
Application General Purpose
Teeth 40 ATB
(Alternate-Top Bevel)
Arbor 5/8"
Kerf .098"
Hook Angle 15°
Makes Clean Cuts in a Wide Variety of Wood
Achieving premium results when performing any kind of woodworking is all about clean, accurate cuts. The Freud D1040A blades make this process easy, fast, and precise. An added time-saving feature, the blades' general-purpose versatility will let you employ them job after job. These blades are even suited to making rip cuts, often achieving a smoother finish than dedicated ripping blades.

Contractors, construction workers, and avid do-it-yourselfers will want to keep these blades on hand for varying jobs that call for making rips and crosscuts in both hardwoods and softwoods. Appropriate application materials include oak, pine, plywood, pressure-treated lumber, and beams.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1040A blades' clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between each of the blades' 40 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over each blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blades' laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping of the blades, helping extend their cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on them over the long term, the Freud D1040A blades are designed for durability. The blades' hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting each blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1040A blades are a great addition to your workshop because they are designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D1040A Diablo 10-Inch General Purpose Saw Blade.
10" x 40 Tooth, Carbide Tipped, Finishing Saw Blade, Thin Kerf.
.You can choose to buy a product and For highly versatile blades that makes clean cuts in a broad variety of wood types, look no further than the Freud D1040A Diablo 10-Inch General Purpose Saw Blades. These are your go-to blades for slicing through oak, pine, plywood, pressure-treated lumber, and beams. Ideal for a wide variety of applications, these blades reduce the need to change blades between tasks. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.


Model # D1040A
Diameter 10"
Machine Use Miter Saw, Table Saw
Application General Purpose
Teeth 40 ATB
(Alternate-Top Bevel)
Arbor 5/8"
Kerf .098"
Hook Angle 15°
Makes Clean Cuts in a Wide Variety of Wood
Achieving premium results when performing any kind of woodworking is all about clean, accurate cuts. The Freud D1040A blades make this process easy, fast, and precise. An added time-saving feature, the blades' general-purpose versatility will let you employ them job after job. These blades are even suited to making rip cuts, often achieving a smoother finish than dedicated ripping blades.

Contractors, construction workers, and avid do-it-yourselfers will want to keep these blades on hand for varying jobs that call for making rips and crosscuts in both hardwoods and softwoods. Appropriate application materials include oak, pine, plywood, pressure-treated lumber, and beams.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1040A blades' clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between each of the blades' 40 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over each blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blades' laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping of the blades, helping extend their cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on them over the long term, the Freud D1040A blades are designed for durability. The blades' hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting each blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1040A blades are a great addition to your workshop because they are designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D1040A Diablo 10-Inch General Purpose Saw Blade.
10" x 40 Tooth, Carbide Tipped, Finishing Saw Blade, Thin Kerf.
at the Best Price Online with Secure Transaction Here...





other Customer Rating:

List Price: $51.90
Price: $29.97 & this item ships for FREE with Super Saver Shipping. Details
You Save: $21.93 (42%)


read more Details

For highly versatile blades that makes clean cuts in a broad variety of wood types, look no further than the Freud D1040A Diablo 10-Inch General Purpose Saw Blades. These are your go-to blades for slicing through oak, pine, plywood, pressure-treated lumber, and beams. Ideal for a wide variety of applications, these blades reduce the need to change blades between tasks. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.


Model # D1040A
Diameter 10"
Machine Use Miter Saw, Table Saw
Application General Purpose
Teeth 40 ATB
(Alternate-Top Bevel)
Arbor 5/8"
Kerf .098"
Hook Angle 15°
Makes Clean Cuts in a Wide Variety of Wood
Achieving premium results when performing any kind of woodworking is all about clean, accurate cuts. The Freud D1040A blades make this process easy, fast, and precise. An added time-saving feature, the blades' general-purpose versatility will let you employ them job after job. These blades are even suited to making rip cuts, often achieving a smoother finish than dedicated ripping blades.

Contractors, construction workers, and avid do-it-yourselfers will want to keep these blades on hand for varying jobs that call for making rips and crosscuts in both hardwoods and softwoods. Appropriate application materials include oak, pine, plywood, pressure-treated lumber, and beams.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1040A blades' clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between each of the blades' 40 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over each blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blades' laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping of the blades, helping extend their cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on them over the long term, the Freud D1040A blades are designed for durability. The blades' hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting each blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1040A blades are a great addition to your workshop because they are designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D1040A Diablo 10-Inch General Purpose Saw Blade.
10" x 40 Tooth, Carbide Tipped, Finishing Saw Blade, Thin Kerf.



Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
Durable micro grain titanium carbide for extreme durability, razor-sharp cuts and long life
Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
Laser cut arbor for accurate blade rotation reducing vibration and premature wear



Exaktor EXOA-2 Table Saw Overarm Blade Cover and Dust Collector


you're want to buy Exaktor EXOA-2 Table Saw Overarm Blade Cover and Dust Collector,yes ..! you comes at the right place. you can get special discount for Exaktor EXOA-2 Table Saw Overarm Blade Cover and Dust Collector.You can choose to buy a product and Exaktor EXOA-2 Table Saw Overarm Blade Cover and Dust Collector at the Best Price Online with Secure Transaction Here...





other Customer Rating:

Price: $458.99 & this item ships for FREE with Super Saver Shipping. Details


read more Details

The Exactor EXOA-2 over-arm blade cover/dust collector will add a reassuring element of safety to your table saw. Its built-Inch dust collection capability means you breathe cleaner air while you work. The EXOA-2 blade cover is counterbalanced at the rear so that it does not block your line of sight. The top and sides are equipped with shatterproof plastic panels for clear vision. With the blade cover in place, the saw blade can be as close as 1/4-Inch from the saw's rip fence. To change saw blades or to work on the saw, you can simply swing the boom and blade cover out of the way. The telescopic boom adjusts to allow positioning the saw's rip fence up to 70-Inch from the saw blade. To crosscut stock longer than the distance between the saw blade and the vertical mast, the top section of the mast and the lightweight aluminum boom easily disconnect without tools. Installation is easy. The vertical mast is adjustable to the height of your saw table. The hollow aluminum boom is 4-Inch in diameter for attaching your dust collection system. A flexible hose connects the other end of the boom to the top of the blade cover. With 600 CFM of air this efficient built-Inch dust collection capability will gather the dust and small chips that are thrown into the air by the revolving saw blade.



Counter-balance is behind the Guard Basket, out of your line of site
Guard basket can be positioned and locked into place or easily pushed completely out of the way
In-feed and out-feed wheels on the guard basket will not mark the surface of your work piece
Will accommodate a 16-Inch saw blade, raised 4-Inch above the table, tilted to 45-Degree
Shipped complete - no extras to buy. A 4-Inch hose with 600-to-800-CFM dust extractor is recommended



Exaktor EXOA-2 Table Saw Overarm Blade Cover and Dust Collector


you're want to buy Exaktor EXOA-2 Table Saw Overarm Blade Cover and Dust Collector,yes ..! you comes at the right place. you can get special discount for Exaktor EXOA-2 Table Saw Overarm Blade Cover and Dust Collector.You can choose to buy a product and Exaktor EXOA-2 Table Saw Overarm Blade Cover and Dust Collector at the Best Price Online with Secure Transaction Here...





other Customer Rating:

Price: $458.99 & this item ships for FREE with Super Saver Shipping. Details


read more Details

The Exactor EXOA-2 over-arm blade cover/dust collector will add a reassuring element of safety to your table saw. Its built-Inch dust collection capability means you breathe cleaner air while you work. The EXOA-2 blade cover is counterbalanced at the rear so that it does not block your line of sight. The top and sides are equipped with shatterproof plastic panels for clear vision. With the blade cover in place, the saw blade can be as close as 1/4-Inch from the saw's rip fence. To change saw blades or to work on the saw, you can simply swing the boom and blade cover out of the way. The telescopic boom adjusts to allow positioning the saw's rip fence up to 70-Inch from the saw blade. To crosscut stock longer than the distance between the saw blade and the vertical mast, the top section of the mast and the lightweight aluminum boom easily disconnect without tools. Installation is easy. The vertical mast is adjustable to the height of your saw table. The hollow aluminum boom is 4-Inch in diameter for attaching your dust collection system. A flexible hose connects the other end of the boom to the top of the blade cover. With 600 CFM of air this efficient built-Inch dust collection capability will gather the dust and small chips that are thrown into the air by the revolving saw blade.



Counter-balance is behind the Guard Basket, out of your line of site
Guard basket can be positioned and locked into place or easily pushed completely out of the way
In-feed and out-feed wheels on the guard basket will not mark the surface of your work piece
Will accommodate a 16-Inch saw blade, raised 4-Inch above the table, tilted to 45-Degree
Shipped complete - no extras to buy. A 4-Inch hose with 600-to-800-CFM dust extractor is recommended



DELTA 50-289 Mobile Machine Base for Unisaw with 52-Inch Unifence


you're want to buy DELTA 50-289 Mobile Machine Base for Unisaw with 52-Inch Unifence,yes ..! you comes at the right place. you can get special discount for DELTA 50-289 Mobile Machine Base for Unisaw with 52-Inch Unifence.You can choose to buy a product and DELTA 50-289 Mobile Machine Base for Unisaw with 52-Inch Unifence at the Best Price Online with Secure Transaction Here...





other Customer Rating:

List Price: $277.94
Price: $179.99 & this item ships for FREE with Super Saver Shipping. Details
You Save: $97.95 (35%)


read more Details

The DELTA 50-289 mobile machine base for Unisaw lets you easily and safely move your machines out of the way when not in use, so you'll be able to maximize the space in your shop. The 50-289 fits all DELTA Unisaws with 52-inch Unifence and adds rolling portability. The mobile machine base features a foot-operated control lever that lets you easily raise and lower the base for either moving or locking it in place. When lowered into position, the base has adjustable foot pads to ensure even contact with the floor.

Delta 50-289 Mobile Machine Base for Unisaw with 52-Inch Unifence



Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning
For UNISAWS with 50-inch/52-inch Fences
20-5/8-inch by 20-5/8-inch Combines 50-273 and 50-284
Durable steel construction
Mobile machine base includes base, control lever, and adjustable foot pads



Makita 2705 10-Inch Contractor Table Saw review


you're want to buy Makita 2705 10-Inch Contractor Table Saw,yes ..! you comes at the right place. you can get special discount for Makita 2705 10-Inch Contractor Table Saw.You can choose to buy a product and Makita 2705 10-Inch Contractor Table Saw at the Best Price Online with Secure Transaction Here...





other Customer Rating:

List Price: $960.00
Price: $569.00 & this item ships for FREE with Super Saver Shipping. Details
You Save: $391.00 (41%)


read more Details

Makita's 2705 10-Inch Contractor Table Saw is a versatile and powerful table saw for use in the shop or on the jobsite. The 2705 combines a range of convenience and ease-of-use features with large capacity and 15 amp power, making it a true best-in-class table saw for a range of professional applications.
View larger


2705 Features
VERSATILE - Adjustable dual slide guards allow for ease of measurements from the blade to the rip fence for cutting setups

EFFICIENT - Riving knife/spreader adjusts to 3 different positions for through, non-through, and dado cuts

PRECISION - Precision-machined table top remains flat and true for accurate cuts

PERFORMANCE - Right extension table allows for greater cutting capacity with the capability to rip 4x8 sheets of plywood

INCLUDES - Blade, rip fence, miter gauge, and wrenches
Tool Specifications

Blade Diameter 10"
Arbor 5/8"
Max. Cutting Capacity
at 90° 3-5/8"
Max. Cutting Capacity
at 45° 2-1/2"
No Load Speed 4,800 rpm
AMPS 15.0
Table Size (WxL) 24-5/8" x 22-1/4"
Net Weight 65.5 lbs.
15 AMP Power with New "Tool-less" Blade Guard System
The 2705 is powered by a 15 amp motor that delivers 4,800 rpm with an electric brake for maximum productivity. The large cutting capacity (3-5/8 inches at 90 degrees and 2-1/2 inches at 45 degrees) can rip 4X material in one pass and can use up to a 6 x 13/16-inch dado blade.

The 2705 also features a tool-less modular blade guard system with adjustable dual side guards to allow for ease of measurement from the blade to the rip fence for cutting setups. The two on-board independent stowable anti-kickback pawls and riving knife/spreader allow for through cuts. In addition, the riving knife/spreader adjusts to three different positions for through, non-through, and dado cuts--and it adjusts without removing the throat plate.

More Capacity and More Accuracy
The precision machined table top remains flat and true for accurate cuts, right out of the box. The right extension table allows for greater cutting capacity with the capability to rip 4 x 8 foot sheets of plywood. Precision adjustment features include a 3/8 x 3/4 inch T-slot miter gauge with grooves that securely support cutting material for wide crosscutting jobs. The rip fence slides effortlessly across the flat table top for more precise adjustments.

Convenience features include a large on and off switch and an easy-to-read scale for fast adjustments. The saw has complete storage capacity to hold most commonly used accessories including saw blade, power supply cord, miter gauge, rip fence, push stick, wrench, safety guard, and dado blade.

Versatile Design for a Range of Applications
The 2705 is a versatile and powerful table saw for use in the shop or on the job site. The 2705 is engineered for remodelers, furniture makers, finish carpenters, cabinet installers, decking and flooring contractors, and general contractors seeking a best-in-class 10-inch contractor table saw for the jobsite or on the bench top. The 2705 is another example of Makita's commitment to innovative technology and best in class engineering.

About Makita's Table Saws
Makita's table saws deliver shop-quality cuts to the jobsite. The large capacity will rip 4X material in one pass, while the precision-machined table top remains flat and true for accurate cuts, right out of the box. Precision features include a new modular blade guard system with adjustable dual side guards to allow for ease of measurement from the blade to the rip fence for cutting setups. A durable and portable table saw stand is also available. This versatile table saw is ideal for use at the jobsite or in the shop.

About Makita
Makita is a worldwide manufacturer of industrial-quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are compact and energy efficient, yet deliver industrial-strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty
Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box
Makita 2705 10-Inch Contractor Table Saw, 32T carbide-tipped blade, rip fence, miter gauge, push stick, and wrenches.

Makita 2705 10" Contractor Table Saw Precision machine table top with right extension table for greater capacity and accurate cuts Tool-less modular blade guard system with an adjustable riving knife Two on board independent stowable anti-kickback pawls and riving knife/spreader for through cuts Adjustable dual side guards allow for ease of measurement from the blade to the rip fence for cutting set ups Riving knife/spreader adjusts to 3 different positions for through, non-through and dado cuts Right extension table allows for greater cutting capacity with the capability to rip 4X8 sheets of plywood Aluminum die cast, precision machined table top remains flat and true for out of the box accuracy Large cutting capacity (3-5/8" at 90º and 2-1/2" at 45º) can rip 4x material in one pass; can use up to a 13/16" dado blade Powerful 15 AMP motor delivers 4,800 RPM and has electric brake for maximum productivity Extended capacity with up to 25" ripping Large on and off switch and easy to read scale for fast adjustments Complete storage capacity to hold most commonly used accessories including saw blade, power supply cord, miter gauge, rip fence, push stick, wrench, safety guard and dado blade 3/8" x 3/4" T-slot miter gauge grooves accepts commercial accessories with T formed shanks for versatile cutting Saw blade enclosed underneath the table to protect the blade during transport Dead-on cam-locking rip fence and bevel locking handle for fast and easy adjustments Two pole slide system for raising and lowering blade for the most efficient and smoothest adjustment of the blade depth.



Tool-less modular blade guard system with an adjustable riving knife
Two on board independent stowable anti-kickback pawls and riving knife/spreader for through cuts
T-slot miter gauge grooves accepts commercial accessories with T-formed shanks for versatile cutting
Rips 4X material in one pass
1 year warranty



Monday, February 27, 2012

Hitachi 726100 60-Teeth Tungsten Carbide Tipped 12-Inch ATB 1-Inch Arbor Finish Saw Blade price


you're want to buy Hitachi 726100 60-Teeth Tungsten Carbide Tipped 12-Inch ATB 1-Inch Arbor Finish Saw Blade,yes ..! you comes at the right place. you can get special discount for Hitachi 726100 60-Teeth Tungsten Carbide Tipped 12-Inch ATB 1-Inch Arbor Finish Saw Blade.You can choose to buy a product and Hitachi 726100 60-Teeth Tungsten Carbide Tipped 12-Inch ATB 1-Inch Arbor Finish Saw Blade at the Best Price Online with Secure Transaction Here...





other Customer Rating:

List Price: $52.78
Price: $39.99 & this item ships for FREE with Super Saver Shipping. Details
You Save: $12.79 (24%)


read more Details

The Hitachi 726100 Tungsten Carbide Tipped 12-Inch Arbor Finish Saw Blade is brazed with 3-metals for an optimal cutting performance. Use this blade for cross cutting ultra fine and smooth finishes in decorative moldings, veneer, laminates and soft and hard woods. With carbide tipped teeth, this alternate top bevel blade withstands years of repeated use and outlasts traditional blades. Tungsten carbide gives saw blades (and some router bits) a sharper, longer lasting tip. With 60 quick biting teeth and the strength of tungsten carbide, this blade delivers smooth rapid cuts. Cut soft and hardwood cabinets with a clean finish cut. This alternate top bevel blade is specially made for crosscutting and is ideal for house framing projects. The micrograin structure provides extreme impact resistance and the kerf is perfect for precision cutting. The Hitachi 725206 Tungsten Carbide Tipped 10-Inch Arbor Saw Blade is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 30-days from the original purchase date. Every Hitachi accessory is designed to the highest standards and is rigorously tested for both performance and durability. Since its inception, Hitachi has pioneered innovative technologies that have improved the quality of craftsmanship worldwide. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

Kerf: .110". Plate: .087". Carbide Grade: C2 micrograin. Fine smooth finish in decorative moldings, veneer laminates, soft and hardwood cabinetry.



Cuts smooth finishes on decorative moldings and veneer
Tungsten carbide tipped teeth (60)
Micrograin structure provides impact resistance
12-Inch blade
Comes with a 30-day limited warranty



DEWALT D24000 1.5-Horsepower 10-Inch Wet Tile Saw


you're want to buy DEWALT D24000 1.5-Horsepower 10-Inch Wet Tile Saw,yes ..! you comes at the right place. you can get special discount for DEWALT D24000 1.5-Horsepower 10-Inch Wet Tile Saw.You can choose to buy a product and DEWALT D24000 1.5-Horsepower 10-Inch Wet Tile Saw at the Best Price Online with Secure Transaction Here...





other Customer Rating:

List Price: $1,766.00
Price:
See price in cart(Why don't we show the price?)
  This item ships for FREE with Super Saver Shipping. Details


read more Details

Whether you're a flooring specialist or a do-it-all remodeler, the DEWALT 10-Inch Wet Tile Saw delivers accurate and reliable performance to get the job done. This saw is able to rip tiles and can handle diagonal cuts. An integrated rail system helps ensure precision and an integrated miter feature allows for accurate bevel cuts. A gutsy 1.5-horsepower motor delivers the power you need to cut tough materials on the jobsite.

10-Inch Wet Tile Saw
At a Glance:
Tough 1.5-horsepower motor to handle hard materials

Generous 3-1/8-inch cut depth and 24-inch ripping capacity

Integrated stainless steel rail system for precision

Convenient plunge-cut and bevel features

Adjustable, dual water nozzles for water control

Three-year limited warranty, one-year free service, and 90-day money-back guarantee

Make accurate tile and stone cuts with the DEWALT 10-Inch Wet Tile Saw. View larger.
Versatile, Powerful Design for Quick Cuts
Cutting tiles is tough work, but this 15 amp DEWALT saw is up to the task. Its powerful 1.5-horsepower motor allows the 10-inch diamond blade to cut cleanly and accurately through hard materials like porcelain and stone.

A generous 3-1/8-inch cut depth allows you to use this saw when cutting most V-cap tiles and pavers. A versatile plunge feature allows you to make quick plunge cuts when shaping pieces to accommodate electrical outlets, A/C registers, and more.

Integrated Rail System and Guides for Accuracy
A tile saw is an investment, and you rely on all the saw's components to stay true over time. This DEWALT saw's sturdy, stainless steel rail system is integrated right into the saw frame, ensuring the accurate cuts you need while also offering excellent durability.

The cantilevering design of this saw's rail and cart system allows for 24-inch ripping capacity. It also allows for accurate diagonal cuts when working with tiles that measure up to 18 inches making it ideal for small and large tiling projects.

A convenient miter feature is also integrated into the saw frame and offers stops at both 45 degrees and 22.5 degrees. Also, the saw's unique edge guide makes it incredibly easy to line up corner cuts.

Dual Water Nozzles and Five-Gallon Pan for Easy Setup
A wet saw keeps your saw blade and your tile cool, which is especially important for jobs that require lots of cuts or involve extra hard materials. A wet saw helps prevent excess downtime that results from waiting for blades to cool and contributes to more professional results by preventing the type of friction that can damage tools or materials.

This DEWALT saw's dual water nozzles can be adjusted to deliver optimal water placement on the blade, minimizing messy over-spray and distracting mist. Rear and side water attachments help contain water runoff and blade spray for a cleaner, easier-to-manage work space, while the saw's five-gallon, durable ABS water pan allows for quick setup and takedown.

Built to be Compact, Convenient, and Durable
Portability is essential for a tile saw, and this DEWALT fits the bill. Weighing 69 pounds with a compact frame measuring 34 by 26 inches, you can easily transport, store, and set up this saw at home or at a jobsite. And when it's time to pack up, the removable cutting cart makes cleaning this tile saw quick and easy.

This 10-inch wet tile saw comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
DEWALT 10-Inch Wet Tile Saw.

The DW368K has been designed to be sturdy and durable while remaining easily portable (click each to enlarge).

DEWALT D24000 Heavy-Duty 1.5 Horsepower 10 Inch Wet Tile Saw



Cantilevering rail/cart system allows for 24-inch ripping capacity (18-inch tile on diagonal)
Only 69 pounds, allowing one person to transport it and set it up
Integrated 45/22.5 degree miter feature for quick angled cuts
Plunge feature allows the user to make quick plunge cuts for electrical outlets and A/C registers
Dual water nozzles can be adjusted for optimal water placement on blade in order to minimize over-spray and mist



DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter-Saw


you're want to buy DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter-Saw,yes ..! you comes at the right place. you can get special discount for DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter-Saw.You can choose to buy a product and DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter-Saw at the Best Price Online with Secure Transaction Here...





other Customer Rating:

List Price: $972.30
Price: $479.99 & this item ships for FREE with Super Saver Shipping. Details
You Save: $492.31 (51%)


read more Details

Whether you're cutting baseboards or crown molding, the DEWALT 10-Inch Double-Bevel Sliding Compound Miter Saw provides quick, accurate cuts to complete the job. Thanks to a powerful motor, an easy-to-adjust cam-lock miter handle, convenient miter and bevel stops, plus a tall fence for accomodate oversized moldings, this saw is ready for a range of crosscutting and miter cutting applications.

10-Inch Double-Bevel Sliding Compound Miter Saw
At a Glance:
Powerful 15 amp motor delivers no-load speed of 4,000 rpm

Adjustable stainless steel miter detent plate with 11 positive stops

Tall, sliding fence for work with crown and base moldings

Four hardened steel bevel stops on each side for versatility

Two steel horizontal rails for accurate blade travel

Three-year limited warranty and 90-day money-back guarantee

This saw features a 15 amp motor and a no-load speed of 4,000 rpm. View larger.

This double-bevel sliding compound miter saw quickly cuts baseboards and trim.
View larger.
Smart, Powerful Design for Quick, Accurate Cuts
The DEWALT double-bevel sliding compound miter saw's 10-inch blade is backed by a powerful and dependable 15 amp motor. Offering a no-load speed of 4,000 rpm, it makes quick work of cutting framing or molding, as well as other crosscutting and miter-cutting jobs.

This sturdy saw is designed to deliver precise cuts, allowing for the versatile setups required for miter applications. The precise miter system's adjustable stainless steel miter detent plate features 11 positive stops for easy setup and improved efficiency. An easy-to-adjust cam-lock miter handle delivers quick and accurate miter angles, and features a convenient detent override, which allows you to adjust the miter setting without the saw slipping into the miter detents. And the saw's big miter capacity--0 to 60 degrees to the left and 0 to 52 degrees to the right--adds versatility.

Tall Fencing and Compact Sliding Rails
The tall fence supports 6-1/4-inch crown molding nested vertically, as well as 6-inch base molding set against the fence. The fence slides out of the way easily when it's time to make bevel cuts. This saw stays compact thanks to its sliding saw dual horizontal steel rails, which feature an innovative clamping mechanism and linear ball bearings for increased accuracy and durability.

Increased Bevel Capacity and Convenient Stops
This saw is designed to deliver quick, accurate bevel cuts. You can easily set up for bevel cuts that measure between 0 and 48 degrees to the left and to the right. This handy setup provides increased capacity for big jobs and allows you to flip the saw instead of the material. Plus, with several bevel stops, it makes finding and setting the bevel angles a quick, easy process.

Ideal for a range of applications, the saw's unique back fence design allows it to deliver clean, 45-degree bevel cuts through dimensional lumber that measures up to 2 by 14 inches.

Portable and Compatible with the DEWALT Laser and L.E.D. System
This lightweight sliding compound miter saw weighs just 51 pounds and features a built-in carry handle, so you can move it around the jobsite easily and lift it comfortably when it comes time to stow the saw at the end of the day.

For additional accuracy and ease of use, this saw is compatible with the DEWALT DW7187 (sold separately) adjustable miter saw laser system (sold separately), which ensures that the cutting line is easy to see via a red laser line. An addition option is the DWS7085 (sold separately) which light the work surface and identifies the specific cut line.

This 10-inch double-bevel sliding compound miter saw also comes with a DEWALT warranty package that includes a three-year limited warranty and a 90-day money-back guarantee.

What's in the Box
DW717 DEWALT 10-Inch Double-Bevel Sliding Compound Miter Saw.


The precise miter system's adjustable stainless steel miter detent plate features 11 positive stops and can rotate 90-degrees for a wide range of cuts.




Exclusive bevel detent system, 7 positive stops delivers fast accurate repeatable cuts
Adjustable stainless steel miter detent plate with 11 positive stops
Optimizes cutting accuracy, exclusive cross cut stop positions cutting head for maximum vertical cut capacity
Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings



Hitachi 726100 60-Teeth Tungsten Carbide Tipped 12-Inch ATB 1-Inch Arbor Finish Saw Blade


you're want to buy Hitachi 726100 60-Teeth Tungsten Carbide Tipped 12-Inch ATB 1-Inch Arbor Finish Saw Blade,yes ..! you comes at the right place. you can get special discount for Hitachi 726100 60-Teeth Tungsten Carbide Tipped 12-Inch ATB 1-Inch Arbor Finish Saw Blade.You can choose to buy a product and Hitachi 726100 60-Teeth Tungsten Carbide Tipped 12-Inch ATB 1-Inch Arbor Finish Saw Blade at the Best Price Online with Secure Transaction Here...





other Customer Rating:

List Price: $52.78
Price: $39.99 & this item ships for FREE with Super Saver Shipping. Details
You Save: $12.79 (24%)


read more Details

The Hitachi 726100 Tungsten Carbide Tipped 12-Inch Arbor Finish Saw Blade is brazed with 3-metals for an optimal cutting performance. Use this blade for cross cutting ultra fine and smooth finishes in decorative moldings, veneer, laminates and soft and hard woods. With carbide tipped teeth, this alternate top bevel blade withstands years of repeated use and outlasts traditional blades. Tungsten carbide gives saw blades (and some router bits) a sharper, longer lasting tip. With 60 quick biting teeth and the strength of tungsten carbide, this blade delivers smooth rapid cuts. Cut soft and hardwood cabinets with a clean finish cut. This alternate top bevel blade is specially made for crosscutting and is ideal for house framing projects. The micrograin structure provides extreme impact resistance and the kerf is perfect for precision cutting. The Hitachi 725206 Tungsten Carbide Tipped 10-Inch Arbor Saw Blade is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 30-days from the original purchase date. Every Hitachi accessory is designed to the highest standards and is rigorously tested for both performance and durability. Since its inception, Hitachi has pioneered innovative technologies that have improved the quality of craftsmanship worldwide. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

Kerf: .110". Plate: .087". Carbide Grade: C2 micrograin. Fine smooth finish in decorative moldings, veneer laminates, soft and hardwood cabinetry.



Cuts smooth finishes on decorative moldings and veneer
Tungsten carbide tipped teeth (60)
Micrograin structure provides impact resistance
12-Inch blade
Comes with a 30-day limited warranty



DEWALT DW7029 Wide Miter Saw Stand Material Support and Stop


you're want to buy DEWALT DW7029 Wide Miter Saw Stand Material Support and Stop,yes ..! you comes at the right place. you can get special discount for DEWALT DW7029 Wide Miter Saw Stand Material Support and Stop.You can choose to buy a product and DEWALT DW7029 Wide Miter Saw Stand Material Support and Stop at the Best Price Online with Secure Transaction Here...





other Customer Rating:

List Price: $54.00
Price: $29.97 & this item ships for FREE with Super Saver Shipping. Details
You Save: $24.03 (45%)


read more Details

The DEWALT DW7029 Wide Miter Saw Stand Material Support and Stop is a 15-Inch wide material support supports wider work piece when cutting. It has a flip-up stop for fast conversion to a cut stop. Adjustable height from 3-7/8-Inch to 6-Inch to match any miter saw table height. Compatible with DW723, DWX723 and DWX724 Miter Saw Stands.

Includes Wide Miter Saw Stand Material Support and Stop - DW7029



15-Inch wide material support; supports wider work piece when cutting
Flip-up stop for fast conversion to a cut stop
Adjustable height from 3-7/8-Inch to 6-Inch to match any miter saw table height
Compatible with dw723, dwx723 and dwx724 miter saw stands



Proxxon 37160 KGS 80 MICRO Chop Saw review


you're want to buy Proxxon 37160 KGS 80 MICRO Chop Saw,yes ..! you comes at the right place. you can get special discount for Proxxon 37160 KGS 80 MICRO Chop Saw.You can choose to buy a product and Proxxon 37160 KGS 80 MICRO Chop Saw at the Best Price Online with Secure Transaction Here...





other Customer Rating:

List Price: $198.00
Price: $195.00 & this item ships for FREE with Super Saver Shipping. Details
You Save: $3.00 (2%)


read more Details

Proxxon Chop and Miter Saw KGS 80 for clean and safe chop and miter cuts of non-ferrous metals, plastics and wood. Ideal for miter cuts. Instead of swiveling the saw head, the table with clampped down work piece is turned. The laterally moving saw head prevents colliding of the saw blade with the vise jaws. This allows for a minimal gap between the work piece vise and the actual cut, which is vibration-free and leaves no burr. Powerful, very quiet DC motor. Power transfer via quietly operating toothed drive belt. Comes with 3-1/8" 24 tooth carbide saw blade.

For clean and safe chop and miter cuts of non-ferrous metals, plastics and wood. Ideal for model building, picture framing, dollhouses, model railroads and other intricate projects.



100-120V AC 200W, 50/60 HZ, 4000 RPM, powerful quiet motor
3-1/8" 24 tooth carbide tipped blade with polycarbonate protection; cover automatically swings up for safe operation
45° miter cuts in both directions and positive stops at 15° intervals
Integrated tightening mechanism with self-centering clamps; V-groove for round pieces; front side groove for clamping thin work



Black & Decker CS1030L 13 Amp 7-1/4-Inch Laser Circular Saw with Soft Grips review


you're want to buy Black & Decker CS1030L 13 Amp 7-1/4-Inch Laser Circular Saw with Soft Grips,yes ..! you comes at the right place. you can get special discount for Black & Decker CS1030L 13 Amp 7-1/4-Inch Laser Circular Saw with Soft Grips.You can choose to buy a product and Black & Decker CS1030L 13 Amp 7-1/4-Inch Laser Circular Saw with Soft Grips at the Best Price Online with Secure Transaction Here...





other Customer Rating:

List Price: $114.46
Price: $59.88 & this item ships for FREE with Super Saver Shipping. Details
You Save: $54.58 (48%)


read more Details

Trying to follow that pencil mark as you cut long stock with a circular saw can be tricky. The mark might blend with the stock if it’s painted, making it difficult to see. And certainly, there’s sawdust to contend with when it comes to keeping an eye on the cut line. Anyone experiencing these troubles will appreciate the laser guide on this 7-1/4-inch circular saw from Black & Decker. The saw’s on-board laser extends a bright, visible line across the work surface, offering a perfectly straight and highly visible cut line that’s easy to follow. The saw is powered by a beefy, 13 amp motor that spins the blade at 5,000 rpm’s, providing plenty of speed and torque for cross cuts and rips through all types of wood. The saw cuts smoothly through material up to 2-3/8 inches (the tool’s capacity at 90 degrees). With an angled cut of 45 degrees, the saw cuts stock up to 1-13/16 inches thick. Bevel adjustments from 0 to 45 offer accurate angled cuts. And, a calibrated depth-adjustment fine-tunes quickly and locks solidly for cuts through materials of varying thicknesses. Best of all, ergonomically designed front- and rear-assist handles with soft grips mean comfort and control on extended jobs and help stabilize the saw for tricky vertical cuts. The purchase is covered by a two-year manufacturer warranty. --Brian D. Olson
What’s in the Box
18-tooth carbide blade, 6-foot cord, and blade wrench.
BLACK & DECKER CS1030L 13-AMP 7-1/4" LASER CIRCULAR SAW. 13-AMP MOTOR,ON-BOARD LASER,BAIL HANDLE DESIGN ,BEVEL ADJUSTS FROM 045,PIRANHA 7 1/4" 18-TOOTH CARBIDE BLADE,INCLUDES WRENCH & 6-FT CORD



Comfortable to handle and hold for precise, accurate results
On-board laser ensures straight cuts
Powerful 13 amp motor; 5,000 RPMs; 90-degree capacity of 2-3/8-inches
Dimensions: 15.4 x 11.8 x 8.1-inches (WxHxD); weighs 8.0-pounds; 2-year warranty
Includes one 18-tooth carbide blade, 6.0-foot cord, and blade wrench